RV Repair Manual

for the RV Do-It-Yourselfer

RV Wheel Chocks & DIY Stabilizers

How to stop the "rock and roll" effect when walking inside your parked trailer.

Wheel chocks do two important jobs: they keep your trailer from rolling when unhitched, and—on tandem-axle rigs—they add noticeable stability by stopping that annoying "rock and roll" motion whenever someone walks up and down the trailer. The principle behind tandem wheel chocks is simple: lock the front and rear tires together so the suspension and wheels can't shift back and forth while parked.

There are plenty of commercially made options available, including X-Chock tandem wheel stabilizers and heavy-duty rubber RV wheel chocks. Most commercial sets are effective and quick to set up—or you can build your own for a fraction of the cost.

Home-Made RV Wheel Chocks

A simple wood-and-hardware design wedged between your tandem tires works surprisingly well and costs very little to put together.

Home-made wooden RV wheel chocks installed between tandem trailer tires

Assembly Diagram

Click the diagram below to view the full-size measurements and layout:

DIY RV wheel chock assembly diagram

Another DIY Version

Here is another simple variation on the same wedging principle:

Alternative homemade RV tandem wheel chock design

These simple homemade wheel chocks make a big improvement in trailer stability and cost very little to build. Plus, you get to brag around the campground that you "made 'em yourself."

Safety Tip: Always chock both sides of your wheels before unhitching your trailer from the tow vehicle, and never rely on stabilizer jacks alone to hold a trailer on a slope.

See also: